MetaWear – multi sensor board for #wearable with BLE

News2016-01-26
Author: Petr Šrámek

Do you plan to make any device for #wearable, sports or education? This project can much help.
MetaWear contains temperature and light sensor, 10 axis motion sensing (gyroscope, magnetometer, barometer, accelerometer) and Bluetooth Low Energy (BLE).

The board is based on nRF51822 SOC from Nordic (ARM? Cortex? M0 CPU and Bluetooth Low Energy).

The board is designed for another sensors through pads.

The microcontroller contains 126kB FLASH, 16kB SRAM and memory for logging is on the board.

Dimensions of board are 24 in diameter x 3mm is height with battery.

The kickstarter project is here: https://www.kickstarter.com/projects/guardyen/tiny-bluetooth-sensors-so-you-can-make-and-connect?ref=category_recommended

Share the article:
Show your
Maker soul!
Buy a T-Shirt
Coffee for Chiptron
Give a boost to the next article

Related Articles

Meteo v3 – verstatile board with ESP12E/ESP07/ESP08

Articles2019-03-30

Originaly, this board – Meteo v2, was designed like replacement of general analog thermometer which costs ~1 USD. But, thanks to comments of makers, the board was redesigned to versatile board which you can use for everthing you need. Meteo…

BigClown “Sensor adapter” versatile expansion board for sensors from ebay and aliexpress

Articles2018-12-30

BigClown, popular IoT platform, offers a lot of TAGs (board with sensor) and modules, but I still had missed versatile board for connection of cheap sensors from ebay and aliexpress – e.g. BMP280, Si7021 or SHT31. Notice: HARDWARIO s.r.o. doesn’t…

Interesting sensors for your weather station

Articles2017-12-17

Do you have any own weather station? Check this article. Here is a short list of interesting sensors. What kind of sensor do you use? Temperature, humidity ot pressure sensor? You can improve your weather station (meteostation). Sensor of temperature,…

The board for weather station (meteostation) with ESP12E module (ESP8266, NodeMCU)

Articles2017-08-11

After my experiences with ESP12E (NodeMCU, ESP8266) and SHT75 temperature/humidity sensor I decided to make second version of board used for weather station. The first version is available on https://time4ee.com/articles.php?article_id=33. The changes of previous board are not so important. Do…

3D printed weather station box with radiation shield for AirBoard/Meteo Mini and SEN55 sensor.

Articles2025-07-08

The article could be titled “How I Enhanced a 3D-Printed Box with a Radiation Shield for a Weather Station with the SEN5x Sensor and Air Board Controller.” This would perfectly capture my effort. I improved the box by adding space…

3D printed box full of sensors for measuring air quality with Wi-Fi, Bluetooth, and open-source firmware.

News2025-06-30

The 3D printed box, which you can easily overlook on the wall, is filled with various sensors for measuring air quality. Inside this inconspicuous box are sensors that measure temperature, humidity, CO2 concentration, as well as VOC and NOx air…

Trends