A new example code for meteostation board. The first example code: ESP12E reads values (temperature/humidity) from Si7021 sensor and then the data is sent to tmep.cz website. This website shows values like chart.
The new example code: ESP12E also reads values from Si7021 and the values are showed on OLED display – 128x64px.
Whole article and project is available on https://time4ee.com/articles.php?article_id=48
After my experiences with ESP12E (NodeMCU, ESP8266) and SHT75 temperature/humidity sensor I decided to make second version of board used for weather station. The first version is available on https://time4ee.com/articles.php?article_id=33. The changes of previous board are not so important. Do…
Everybody has meteostation… somebody better, somebody worse. I wanted meteostation too. I didn’t spend a time with development of sophistic device. My requirements was very easy – measurement temperature, humidity and use SHT75, because I got that as a sample…
Originaly, this board – Meteo v2, was designed like replacement of general analog thermometer which costs ~1 USD. But, thanks to comments of makers, the board was redesigned to versatile board which you can use for everthing you need. Meteo…
The weather station is the first DIY project which makers do after sometime of playing with electronics. It is project which is helpful and makers using this long time. This article introduce my weather station which is based on board…
After my experimentes with NodeMCU and SHT75 I designed next version of my mini meteostation. I designed own PCB for plastic box. I chose the same ESP8266 module which is in NodeMCU, ESP12E. SHT75 temperature/humidity sensor is expensive (but very…
The article could be titled “How I Enhanced a 3D-Printed Box with a Radiation Shield for a Weather Station with the SEN5x Sensor and Air Board Controller.” This would perfectly capture my effort. I improved the box by adding space…
