Opens in a new tab

Star Gate right at home. Print your perfect replica of the Stargate.

News2025-07-16
Author: Petr Šrámek
3D printed Stargate from the series Stargate
3D printed Stargate from the series Stargate

The Stargate, or Stargate SG-1, still has many fans – who wouldn’t love the action-packed Jack O’Neill or the clever Samantha Carter? Thanks to 3D printing, you can have your very own Stargate from the SG-1 series. What’s more, the entire model and how to assemble it are very well described in the provided manual.

This isn’t the first time I’ve written about a 3D model from the Stargate series – we already had one Stargate here, and you can also print the city of the Ancients.

What makes this model so interesting? The detailed craftsmanship and especially the available manual – what the Stargate is made of, how to connect and glue everything together.

The gate to other worlds not only looks good, it also lights up and makes sounds.

You can find the model on Printables, and there you will also find the manual https://www.printables.com/model/1333011-stargate-sg-1-kit

Detailed craftsmanship of the 3D printed Stargate
Detailed craftsmanship of the 3D printed Stargate
Stargate - not only does it look great, but it can also light up.
Stargate – not only does it look great, but it can also light up and make sounds.
Share the article:
Show your
Maker soul!
Buy a T-Shirt
Coffee for Chiptron
Give a boost to the next article

Related Articles

University student builds 3D printer with DIY INDX. Instructions and files are open-source.

News2026-08-15

Tool changes in a second with practically no waste. That’s what YUDX promises—a toolchanger built by one student and released entirely for free on GitHub. Eight tool heads, a single motor for everything, and a base built on the Voron…

Prusa has updated its entire printer lineup: XL+, CORE One L+, and CORE One+ (Gen 2).

News2026-08-14

Prusa announced on August 12 a refresh of its entire lineup. The XL becomes the XL+, the CORE One L becomes the CORE One L+, and the CORE One+ is now designated Gen 2. Prices remain the same, and all…

Prusa INDX vs. Bambu Vortek vs. Snapmaker U1: Technical Comparison of Tool Changers for 2026

News2026-04-28

Prusa Research and Swedish Bondtech have launched pre-orders for the INDX conversion kit for Prusa CORE One/+ printers. It’s not just another MMU-like filament switcher. It’s an architecture that technically surpasses even Bambu Lab’s Vortek—in several key parameters.

Internet radio receiver with ESP32. Complete guide including 3D printing. Home Assistant support included.

News2025-09-23

The YoRadio project is an open-source internet radio built on the ESP32 Wi-Fi and Bluetooth chip with the ESP32-audioI2S library. It features complete documentation, a wide range of supported displays, and can be controlled via MQTT (suitable for Home Assistant).

Native Linux on ESP32-S3 – No Emulation, Directly with 9.7″ E-Paper

News2026-09-14

Linux 6.11 runs directly on the Xtensa core of the ESP32-S3 without emulation. After login, the shell mirrors to the 9.7″ ED097TC2 e-paper display.

Home RADAR? AERIS-10 with a range of up to 20 km.

Aeris-10
News2026-04-14

When radar is mentioned, most people picture a metal dish on an airport roof or a giant military installation surrounded by barbed wire. The AERIS-10 project (short for Array Electronic Radar with Integrated System) is embarking on the development of…

Trends